coaxial cable kit

The Triplett CableRater is a revolutionary dB Loss Meter for measuring Loss or Gain in Cable Television distribution systems. It consists of a portable handheld battery operated Transmitter and Receiver designed to generate and measure a test signal that is similar to a Cable TV signal. The Transmitterâ??s test signal can be applied to the input of a Cable TV distribution system consisting of coaxial cable, amplifiers, splitters, switches, etc. and the Receiver connected to any outlet downstream of the Transmitter, and the Loss or Gain between the Transmitter and Receiver measured with the press of a button. Product features: Measures dB Gain or Loss in Cable TV Distribution Systems (+/-20dB range). Tests without requiring connection to Cable TV service. Verify installation before Cable TV service is connected. CableRater Transmitter simulates frequency and level of TV channel. Large backlit (Blue EL) digital display for accurate low light testing. Lightweight and convenient. Locking power switch on the Transmitter prevents accidental turn on. Battery Test in Transmitter and Receiver. Efficient Transmitter design permits hours of tests without replacing battery. Real Time measurement. F connectors for easy connection to standard cable TV distribution system. Protected against 120VAC 60Hz line cross. Works with typical â??power injectorâ?? amplifier systems. Receiver is user configurable for continuous operation or auto-shutoff. Kit includes Transmitter, Receiver, Patch Cable, Carrying Case, and 2 – 9V batteries. Typical uses: Measure dB Loss (or Gain) from main entrance to each TV outlet, including Loss in all cable, connectors, switches, splitters, and amplifiers in between. Check for bad / lossy cables. Check for bad / lossy connectors and connections. Check for bad / lossy splitters. Check for bad / lossy switches. Check for bad amplifiers, verify amplifier gain. Check for excessive loss in cable (too long of a run). Check for intermittent connections. Identify cables.
CHECK PRICE NOW!
Read Full Review >>

Best review for Triplett 3279 CableRater dB Loss Meter

The NEW Triplett TDR is a hand-held Digital Cable Length Meter / TDR Fault Locator designed to both measure the length of copper communication cables and distance to a fault. Advanced signal processing techniques enable it to identify opens and short circuits, and directly indicate the fault distance on an alpha-numeric LCD. An internal library of standard cable types enables accurate measurement on communication cables without the necessity of entering Velocity of Propagation (VOP) information. For non-standard cables, the VOP is adjustable from 0-99 percent. The Triplett TDR incorporates an oscillating tone generator, that is detectable with a standard tone probe such as the Triplett Hound or Hound 2 Probe, for use in the tracing and identification of pairs within a cable. Housed in a tough ABS plastic case and supplied complete with test leads and a protective tool-belt holster, the Triplett TDR is designed and manufactured to international standards for quality, safety, and reliability. Specifications: Approximate Range: Coaxial Cable 6400′, structured wiring 2500′, telephone cable 2500′. Resolution: 1′ < 300' and 3' > 300′. Accuracy: +/- 2′ – Cables up to 10′,+/- 5′ – Cables 10 to 200′, +/- 3 percent – Cables longer than 200′. Cable library: 39 standard cable types. Output impedance: 50, 75 and 100 ohms. Velocity of Propagation: Adjustable 0 to 99 percent. Tone generator: oscillating 810 – 1110Hz. Display: Dot Matrix LCD. Connector Type: BNC. Power Supply: 1 – 9 Volt Battery. Battery Life: Appox. 2000 Tests. Operating Temperature: 5 to 122 degreeF. Storage Temperature: -4 to 158 degreeF. Dimensions: 8 x 3 x 1.5 inches. Weight: 8 oz. Safety: IEC61010-1, EN 60950, EMC: BS/EN 61326-1. Includes: Padded Cordura Holster, Fused Test Lead – BNC to Alligator Clips (PN 79-792), 9V Battery.
CHECK PRICE NOW!
Read Full Review >>

Best review for Triplett 3271 TDR Cable Fault Finder